Labconco FlaskScrubber Vantage Glassware Washer

FlaskScrubber® Vantage® Series Glassware Washers have specialized features for contamination-sensitive research. They are designed to wash and dry narrow-neck and general purpose glassware.

  • Fully Programmable – Select water temperature, detergent and rinse aid amounts, wash and rinse times, and number of rinses.
  • Native Memory – Stores both factory preset and user set programs for reproducible protocols.
  • Exportable Data – RS-232 port allows documentation of settings and actual wash conditions.
  • Viewing Window with Light – See each cycle in progress.
  • High Temperature – Up to 199° (93°C) water removes lipids and sanitizes glassware.
  • Multiple Rinse Programs – Program up to 6 purified water rinses.
  • Forced air drying  – 99.97% efficient HEPA filter removes airborne particulates.

Labconco FlaskScrubber Vantage Glassware Washer

FlaskScrubber® Vantage® Series Glassware Washers have specialized features for contamination-sensitive research. They are designed to wash and dry narrow-neck and general purpose glassware.

  • Fully Programmable – Select water temperature, detergent and rinse aid amounts, wash and rinse times, and number of rinses.
  • Native Memory – Stores both factory preset and user set programs for reproducible protocols.
  • Exportable Data – RS-232 port allows documentation of settings and actual wash conditions.
  • Viewing Window with Light – See each cycle in progress.
  • High Temperature – Up to 199° (93°C) water removes lipids and sanitizes glassware.
  • Multiple Rinse Programs – Program up to 6 purified water rinses.
  • Forced air drying  – 99.97% efficient HEPA filter removes airborne particulates.

Features

  • Lower spindle rack, of Type 304 stainless steel, with 36 detachable large spindles for washing narrow-neck glassware. Rack accommodates a variety of inserts for holding beakers, culture tubes and other specialty glassware (inserts sold separately).
  • 18 glassware holders, 36 clips and 10 additional interchangeable small spindles.
  • Water temperature reaches 93° C (199° F) to sanitize glassware and for enhanced washing and faster drying.
  • LCD information center for customizing cycles and monitoring operation, including internal water temperature (° C or ° F)
  • Water recirculation rates of 96 gal/min (363 liters/min) when operated on 230 Volt, 50 Hz models and 112 gal/min (424 liters/min) on 230 Volt, 60 Hz for thorough cleaning
  • Dual pumps, one for washing and one for draining, to reduce potential for cross contamination
  • Built-in purified water pump to bring non-pressurized or pressurized purified water into the tank for up to six pure water rinses
  • Built-in steam generator that produces hot vapor to penetrate and remove dried residue for cleaner glassware
  • Water conductivity monitor to confirm rinse water cleanliness and effective detergent removal
    • RS-232 port for monitoring washer operation on a user-supplied computer or recorder
  • Automatic liquid detergent dispenser with peristaltic pump
  • Automatic rinse aid dispenser
  • Manual-fill detergent dispenser for powder or liquid detergent
  • Manual-fill rinse solution dispenser
  • Built-in, HEPA-filtered forced air drying through the spindles up to 99 minutes and programmable from 38-70°C (100-158° F). HEPA filter is 99.97% efficient on particulates 0.3 micron.
  • 10 factory-set cycle programs: RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, SCIENTIFIC, SCIENTIFIC PLUS, INTENSE, INTENSE PLUS, EXTREME, and DRY ONLY • Alarms with display for HOT GLASS, PLEASE WAIT, WATER LOW, WATER HIGH, OVERFLOW, LIQUID DETERGENT and RINSE AID
  • Two user-set cycle programs
  • User-set delayed start (up to 8 hours)
  • Type 304, brushed stainless steel door, sides, top, tank, upper and lower wash arms
  • Clear tempered safety glass viewing window
  • LED interior light
  • One-piece, stainless steel, fine mesh particle drain filter to trap debris in tank to protect the pumps
  • No center water distribution tower allowing for greater glassware capacity
  • Four leveling feet
  • 3/8" IPS inlet fitting for hot tap water connection
  • Factory-installed drain hose and band clamp
  • Two year warranty on parts and labor
  • Made in the U.S.A.
  • Accommodate optional Upper Spindle Rack with additional wash arm and side release latches (sold separately)
  • Accommodate optional SteamScrubber Upper and Lower Racks (sold separately)

Options

  • Come standard as freestanding. Are convertible to undercounter.